Prosoft-technology AN-X-AMX Manuel d'utilisateur télécharger pdf (Page 21)

AN-X-DCSNet2 Page

DCSNet Configuration

You set the DCS mode of operation (master or slave) and the drop

number and depth using the web interface.

Start your web browser and enter the AN-X IP address as the address.

Select Automation Network/DCSNet Configuration to set the DCS drop

number and depth.

AN-X-DCSNet can be used as a DCS master or slave. Check Master or

Slave to select which one you want.

If the AN-X-DCSNet is a DCS slave, enter the Drop Number and Drop

Depth. These entries are ignored if the AN-X is a DCS master.

Click the SUBMIT button to send the values to AN-X.

AN-X defaults to DCS slave operation with drop number 55 and drop

depth 1.

For further details, refer to page 48.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 67 68

Pas de commentaire

Prosoft-technology AN-X-AMX Manuel d'utilisateur Page 21