Prosoft-technology AN-X-AMX Manuel d'utilisateur télécharger pdf (Page 19)

AN-X-DCSNet2 Page

Select Utilities/Select An AN-X and enter the MAC Address and IP

address.

Click OK to accept the setting.

Select Utilities/AN-X IP Configuration.

Enter an IP Address. In this case we chose 192.168.0.10

Enter the same Subnet mask and Default gateway that you entered for the

computer. The default gateway address does not exist on the network

but AN-X requires that the field have a valid entry.

Click Finish to accept the settings.

Select Utilities/Restart AN-X to restart AN-X with the new parameters.

When the AN-X has restarted (SYS LED is solid green), select

Utilities/Locate All AN-X Modules and confirm that the AN-X is found

with the new parameters.

1 2 ... 14 15 16 17 18 19 20 21 22 23 24 ... 67 68

Pas de commentaire

Prosoft-technology AN-X-AMX Manuel d'utilisateur Page 19