Prosoft-technology AN-X-AMX Manuel d'utilisateur télécharger pdf (Page 14)

Page

AN-X-DCSNet2 November 2011

The preferred method is to cycle power on the AN-X. Select the first

option on the screen, power off the AN-X, and click the Next >> button.

The second method, useful if the AN-X in not easily accessible, is to

send it a command over Ethernet. The AN-X must be powered on and

completely running for this method to work. For example, if this is the

first time you are configuring a new AN-X, allow sufficient time for it to

acquire an IP address from a DHCP server or to time out and use its

default IP address (about 3 minutes). Select the second option on the

screen and click the Next >> button.

Step 3:

If you powered off the AN-X, turn it back on. Wait for AN-X to enter

boot mode. While AnxInit is waiting, the Next>> button is disabled.

When AN-X is in boot mode, the Next>> button is enabled.

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 67 68

Pas de commentaire

Prosoft-technology AN-X-AMX Manuel d'utilisateur Page 14