Prosoft-technology MVI69-MCM Manuel d'utilisateur télécharger pdf (Page 43)

MVI69-MCM ♦ CompactLogix or MicroLogix Platform Configuring the MVI69-MCM Module

Modbus Communication Module User Manual

ProSoft Technology, Inc. Page 43 of 167

March 22, 2011

Disabling the RSLinx Driver for the Com Port on the PC

The communication port driver in RSLinx can occasionally prevent other

applications from using the PC’s COM port. If you are not able to connect to the

module’s configuration/debug port using ProSoft Configuration Builder (PCB),

HyperTerminal or another terminal emulator, follow these steps to disable the

RSLinx Driver.

1 Open RSLinx and go to C

OMMUNICATIONS

>RSW

2 Make sure that you are not actively browsing using the driver that you wish to

stop. The following shows an actively browsed network:

3 Notice how the DF1 driver is opened, and the driver is looking for a processor

on node 1. If the network is being browsed, then you will not be able to stop

this driver. To stop the driver your RSWho screen should look like this:

Branches are displayed or hidden by clicking on the

or the icons.

4 When you have verified that the driver is not being browsed, go to

OMMUNICATIONS

ONFIGURE

RIVERS

1 2 ... 38 39 40 41 42 43 44 45 46 47 48 ... 166 167

Pas de commentaire

Prosoft-technology MVI69-MCM Manuel d'utilisateur Page 43