Prosoft-technology MVI69E-MBTCP Manuel d'utilisateur télécharger pdf (Page 3)

Important Safety Information

North America Warnings

A This Equipment is Suitable For Use in Class I, Division 2, Groups A, B, C, D or Non-Hazardous Locations Only.

B Warning – Explosion Hazard – Substitution of Any Components May Impair Suitability for Class I, Division 2.

C Warning – Explosion Hazard – Do Not Disconnect Equipment Unless Power Has Been Switched Off Or The

Area is Known To Be Non-Hazardous.

D The subject devices are powered by a Switch Model Power Supply (SMPS) that has regulated output voltage of

5 VDC.

ATEX Warnings and Conditions of Safe Usage:

Power, Input, and Output (I/O) wiring must be in accordance with the authority having jurisdiction.

A Warning - Explosion Hazard - When in hazardous locations, turn off power before replacing or wiring modules.

B Warning - Explosion Hazard - Do not disconnect equipment unless power has been switched off or the area is

known to be non-hazardous.

C These products are intended to be mounted in an IP54 enclosure. The devices shall provide external means to

prevent the rated voltage being exceeded by transient disturbances of more than 40%. This device must be used

only with ATEX certified backplanes.

D DO NOT OPEN WHEN ENERGIZED.

Agency Approvals and Certifications

Agency

ATEX; Category 3, Zone 2

CE Mark

CSA; CB Safety

Environmental

KCC

RoHS Compliant

UL/cUL; Class 1, Div. 2 Groups A, B, C, D

1 2 3 4 5 6 7 8 ... 149 150

Pas de commentaire

Prosoft-technology MVI69E-MBTCP Manuel d'utilisateur Page 3