ProSoft Technology ProLinx-HART Spécifications télécharger pdf (Page 110)

Reference DFNT ♦ ProLinx Gateway

Protocol Manual EtherNet/IP Explicit Messaging Client/Server

Page 110 of 124 ProSoft Technology, Inc.

July 24, 2013

Verify that the CIP radio-button is selected as the COMMUNICATION METHOD. The

PATH specifies the message route from the ControlLogix processor to the DFNT

module. Path elements are separated by commas. In the example path shown,

the first element is "Enet", which is the user-defined name given to the 1756-

ENET module in the chassis (you could substitute the slot number of the ENET

module for the name), the second element, "2", represents the Ethernet port on

the 1756-ENET module, and the last element of the path, "192.168.0.75", is the

IP address of the DFNT module, the target for the message.

More complex paths are possible if routing to other networks using multiple 1756-

ENET modules and racks. Refer to the Rockwell Automation Support

Knowledgebase for more information on Ethernet routing and path definitions.

1 2 ... 105 106 107 108 109 110 111 112 113 114 115 ... 123 124

Pas de commentaire

ProSoft Technology ProLinx-HART Spécifications Page 110