Prosoft-technology MVI56E-LDM Manuel d'utilisateur télécharger pdf (Page 215)

ControlLogix Platform ♦ "C" Programmable Cable Connections

Linux Application Development Module Developer's Manual

ProSoft Technology, Inc. Page 209 of 264

March 12, 2014

6 Cable Connections

The application ports on the MVI56E-LDM module support RS-232, RS-422, and

RS-485 interfaces. Please inspect the module to ensure that the jumpers are set

correctly to correspond with the type of interface you are using.

Note: When using RS-232 with radio modem applications, some radios or modems require

hardware handshaking (control and monitoring of modem signal lines). Enable this in the

configuration of the module by setting the UseCTS parameter to 1.

6.1 RS-232 Configuration/Debug Port

This port is physically an RJ45 connection. An RJ45 to DB-9 adapter cable is

included with the module. This port permits a PC-based terminal emulation

program to view configuration and status data in the module and to control the

module. The cable pinout for communications on this port is shown in the

following diagram.

1 2 ... 210 211 212 213 214 215 216 217 218 219 220 ... 263 264

Pas de commentaire

Prosoft-technology MVI56E-LDM Manuel d'utilisateur Page 215