Prosoft-technology AN-X2-GENI Manuel d'utilisateur télécharger pdf (Page 11)

AN-X2-GENI (AN-X-GENI/B) Page 5

Installation

Prevent Electrostatic Discharge

The module is sensitive to electrostatic discharge.

WARNING!

Electrostatic discharge can damage integrated circuits or

semiconductors. Follow these guidelines when you handle the module:

• Touch a grounded object to discharge static potential

• Do not touch the connector pins

Power

AN-X requires DC power input of anywhere from 12 to 24 VDC

Left to right the pins on the power connector are chassis ground, negative voltage and

positive voltage. Pin 1 is closest to the Ethernet connector.

The chassis ground should be connected.

Power consumption internally is 200 mA @ 12VDC or 100 mA @ 24VDC.

The part number for the power connector is Phoenix MSTB 2.5/3-ST-5.08

Genius Cabling and Termination

Refer to Genius I/O System and Communications User’s Manual, GEK-90486F-1 for

detailed information on Genius cabling and installation.

The module has a 5-pin Phoenix connector for connection to the Genius I/O network.

The part number for the Genius bus connector is MSTB 2.5/5-ST-5.08

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 63 64

Pas de commentaire

Prosoft-technology AN-X2-GENI Manuel d'utilisateur Page 11