Prosoft-technology AN-X-AMX Manuel d'utilisateur télécharger pdf (Page 33)

AN-X-DCSLOG Page 29

1. Select the Ethernet adapter that’s connected to the AN-X. In most cases there will be

just one Ethernet adapter in the computer. The AN-X must be on the same subnet as the

computer.

2. Enter the MAC address of the AN-X you are updating. This is printed on the AN-X

label. It consists of six pairs of hexadecimal digits, separated by hyphens. In the

example above, it’s 00-0c-1a-00-00-09.

If the AN-X is already online, you can obtain its MAC address using the Utilities/Locate

All AN-X Modules command.

3. Enter the IP address of the AN-X you want to update

Step 2

In step 2, you choose a method of restarting AN-X to put it in config mode.

1 2 ... 28 29 30 31 32 33 34 35 36 37 38 ... 43 44

Pas de commentaire

Prosoft-technology AN-X-AMX Manuel d'utilisateur Page 33