Prosoft-technology AN-X-AMX Manuel d'utilisateur télécharger pdf (Page 34)

Page

AN-X-AMXRIO November 2011

Selecting an AN-X

Before you can perform an operation on an AN-X, you must select it. Choose

Utilities/Select An AN-X to select a specific AN-X.

From the Adapter list, select the network adapter that connects to the Ethernet network

that contains the AN-X.

In the Ethernet MAC Address field, enter the MAC Address of the AN-X you wish to

select. It can be found on the AN-X label or using the Locate All AN-X Modules

command. The format is as shown above, six pairs of hexadecimal digits separated by

hyphens.

1 2 ... 29 30 31 32 33 34 35 36 37 38 39 ... 54 55

Pas de commentaire

Prosoft-technology AN-X-AMX Manuel d'utilisateur Page 34