Prosoft-technology MVI71-MNET Manuel d'utilisateur télécharger pdf (Page 40)

MVI71-MNET ♦ PLC Platform Module Configuration

Modbus TCP/IP Interface Module User Manual

Page 40 of 109 ProSoft Technology, Inc.

June 23, 2009

2.8 Download the Project to the Module

In order for the module to use the settings you configured, you must download

(copy) the updated Project file from your PC to the module.

To Download the Project File

1 In the tree view in ProSoft Configuration Builder, click once to select the

MVI71-MNET module.

2 Open the P

ROJECT menu, and then choose MODULE / DOWNLOAD. The

program will scan your PC for a valid com port (this may take a few seconds).

When PCB has found a valid com port, the D

OWNLOAD dialog box will open.

3 Choose the com port to use from the dropdown list, and then click the

OWNLOAD button.

The module will perform a platform check to read and load its new settings.

When the platform check is complete, the status bar in the D

OWNLOAD dialog

box with the message "Module Running".

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 108 109

Pas de commentaire

Prosoft-technology MVI71-MNET Manuel d'utilisateur Page 40