Prosoft-technology MVI69-DNPSNET Manuel d'utilisateur télécharger pdf (Page 26)

MVI69-DNPSNET ♦ CompactLogix or MicroLogix Platform Configuring the MVI69-DNPSNET Module

Distributed Network Protocol Interface Module

Page 26 of 119 ProSoft Technology, Inc.

November 3, 2008

2.2 [Backplane Configuration]

This section of the file describes the database setup and module level

parameters.

2.2.1 Module Name

0 to 80 characters

This parameter assigns a name to the module that can be viewed using the

configuration/debug port. Use this parameter to identify the module and the

configuration file.

2.2.2 Read Register Start

0 to 8899

This parameter specifies the starting register in the module where data will be

transferred from the module to the processor. Valid range for this parameter is 0

to 8899.

2.2.3 Read Register Count

0 to 8900

This parameter specifies the number of registers to be transferred from the

module to the processor. Valid entry for this parameter is 0 to 8900.

2.2.4 Write Register Start

0 to 8899

This parameter specifies the starting register in the module where the data will be

transferred from the processor to the module. Valid range for this parameter is 0

to 8899.

2.2.5 Write Register Count

0 to 8900

This parameter specifies the number of registers to transfer from the processor to

the module. Valid entry for this parameter is 0 to 8900.

2.2.6 Block Transfer Size

60, 120 or 240

This read-only parameter specifies the number of words in each block transferred

between the module and processor. Valid values for this parameter are 60, 120

and 240.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 118 119

Pas de commentaire

Prosoft-technology MVI69-DNPSNET Manuel d'utilisateur Page 26