Prosoft-technology 5201-MNET-ASCII Manuel d'utilisateur télécharger pdf (Page 22)

Modbus TCP/IP Protocol Configuration MNET ♦ ProLinx Gateway

Driver Manual Modbus TCP/IP Interface Module

Page 22 of 78 ProSoft Technology, Inc.

September 1, 2010

2.4 [MNET CLIENT 0]

The [MNET CLIENT 0] section of the CFG file specifies the parameters for the

client to be emulated on the gateway. The command list for the client is entered

in a separate section.

2.4.1 Minimum Command Delay

0 to 32767

This parameter specifies the number of milliseconds to wait between the initial

issuance of a command. This parameter can be used to delay all commands sent

to slaves to avoid "flooding" commands on the network. This parameter does not

affect retries of a command as they will be issued when failure is recognized.

2.4.2 Response Timeout

0 to 65535 milliseconds

This is the time in milliseconds that a Client will wait before re-transmitting a

command if no response is received from the addressed server. The value to use

depends upon the type of communication network used, and the expected

response time of the slowest device on the network.

2.4.3 Retry Count

0 to 10

This parameter specifies the number of times a command will be retried if it fails.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 77 78

Pas de commentaire

Prosoft-technology 5201-MNET-ASCII Manuel d'utilisateur Page 22