ProSoft Technology ProLinx DNPS Manuel d'utilisateur Page 42
- Page / 86
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
ProLinx DNPS ♦ ProLinx Gateway Reference
DNP 3.0 Slave User Manual
Page 42 of 86 ProSoft Technology, Inc.
December 1, 2009
Type Specifications
DNP Slave
Node address 0 to 65534 (software selectable)
Status Data
Error codes, counters and port status available per configured
slave port
3.1.2 Serial Port Specifications
Type Specifications
Serial Ports
Serial Port Adapter Cables
One Mini DIN to DB-9M adapter cable included for
each configurable serial port
Config Port Connector/ Pinout DB-9F connector / DTE pinout
Serial Port Isolation 2500V RMS port-to-port isolation per UL 1577.
3000V DC min. port to ground and port to logic
power isolation.
Serial Port Protection
RS-485/422 port interface lines TVS diode protected
at +/- 27V standoff voltage.
RS-232 port interface lines fault protected to +/- 36V
power on, +/- 40V power off.
Note: On all ProLinx gateways, data from the application port on the main board, serial Port 0, is
not buffered. Packets go directly to and from the serial chipset to the processor. This has the
potential to cause the serial communications to become erratic at baud rates above 38,400 baud.
ProLinx gateways with 4 serial ports have a separate serial interface board for serial Ports 1, 2,
and 3. These serial ports are buffered and can handle communications up to 115,200 baud.
- ProLinx DNPS 1
- All ProLinx 2
- Products 2
- Your Feedback Please 3
- ProSoft Technology 3
- Product Documentation 3
- Contents 5
- 1 Start Here 9
- 1.2.1 Using the Online Help 10
- 1.3.1 Set Up the Project 11
- 1.3.2 Set Module Parameters 13
- 1.4.1 [DNP Slave] 14
- Binary Inputs 15
- ES or NO 17
- 1.4.6 Common Configuration 25
- OWNLOAD button 29
- OWNLOAD dialog 29
- In This Chapter 31
- 2.1 Requirements 31
- IAGNOSTICS 32
- IAGNOSTICS dialog box 33
- to open the Main Menu 33
- 2.2 LED Indicators 35
- 2.2.1 Base Module LEDs 35
- 2.2.3 4101 Series LEDs 36
- 3 Reference 41
- 3.3 Functional Overview 50
- 3.3.1 DNP 3.0 Slave Port 50
- DNP Module 53
- Other Protocol 53
- 3.3.6 Designing the system 55
- define 58
- 3.4 DNP Collision Avoidance 64
- 3.4.1 When Required 64
- 3.4.2 Rules 64
- 3.4.3 Timing Chart 64
- 3.5.1 First Byte 65
- 3.5.2 Second Byte 66
- 3.6 IIN Bit Definitions 66
- 3.6.1 First Byte 66
- 3.6.2 Second Byte 67
- 3.7 Event Size Computation 67
- 3.8 Device Profile 68
- 3.9 Subset Definition 70
- 4.2.1 All Product Returns: 80
- 4.3 LIMITED WARRANTY 81
- 4.3.8 No Other Warranties 84
- 4.3.9 Allocation of Risks 84
- DNP Digital Input Data • 59 85
Produits connexes et manuels pour Passerelles/contrôleurs ProSoft Technology ProLinx DNPS
(46 pages)Visioneer PROOCR100 Handbücher
Bedienungsanleitungen und Benutzerhandbücher für Software Visioneer PROOCR100.
Wir stellen 2 PDF-Handbücher Visioneer PROOCR100 zum kostenlosen herunterladen nach Dokumenttypen zur Verfügung Betriebsanweisung, Wartungshandbuch
Commentaires sur ces manuels